Huawei Vne-Lx2 Dump File Dead Boot Repair With Ufi Or Easy Jtag.
File Type : Paid Only.
Included : Nvdata, Nvram Security File.
Contact Info : +8801733862630 Whatsapp.
info
------------
onnection status: XHCI:HUB3[#1]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8843-1358
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 48MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x13 (Micron)
Product name: S0J38D (0x53304a333844), rev: 0x10, serial number: 0x24614ED1
Manufacturing date: Feb 2021
CID: 13014E53 304A3338 44102461 4ED128E4
CSD: D05F0132 8F5913FF FFFFFFEF 964000A8
Device version: 0x000B
Firmware version: 0x6
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB [Provisioned, counter: 2375]
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 2 MiB
Hardware reset function: 1
Secure Write Protect Information: 0x00
Secure Feature support: 0x55
Partition configuration: 0x50
Boot acknowledge is sent during the boot operation
Boot partition 2 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
crypto state: encrypted?
Post a Comment